Steel, Peech and Tozer

Early iron working & Ickles Rolling Mill

The site in which the steel works would be built has a long history of iron working. Excavations of the Roman fort at Templeborough found evidence of iron working during Roman times.^[2] In the medieval period, some of the land in the area was owned by Roche Abbey. During this time water-mills may have been created, powered by water channelled through cuttings off the River Don. After the dissolution of the monasteries, the land was used by the Reresby family. By 1560, two rolling mills had been constructed.^[3]

Around 1833, one of the rolling mills was adapted for rolling steel, previously being used to extract vegetable oil from seeds.^[1] By this time, a crescent-shaped area along the River Don, stretching from Masbrough through Ickles, had become the home of many of the town's iron and steel works.^{[citation needed]} The area soon underwent development and industrialisation, promoted by the opening of the Midland railway in 1840.^[4] By 1871, Ickles Rolling Mill Limited was created to operate the steel rolling mill in Ickles.^[1]

Phoenix Works

Situated between the main turn-pike road linking Rotherham and Sheffield (now called Sheffield Road) and the River Don was built the Phoenix Works, a leading manufacturer of large iron forgings, made using water powered tilt hammers. The works made forgings for marine engines, shafts for use in paddle steamers and crank axles etc.^{[citation needed]}

A separate steel works, utilising the Bessemer process, was set up by Thomas Hampton and Mr. Radcliffe in 1871, located to the north of the River Don.^[5] Phoenix took over the works in 1872 - the company was now named Phoenix Bessemer Steel Company Limited. Phoenix also took over Ickles Rolling Mill in 1874.^[1]

Steel, Peech and Tozer

In 1875, the company failed due to a major customer going under. The assets were purchased by Henry Steel later that year. The new company became known as Steel, Tozer and Hampton Limited, taking its name from those of the directors. Henry Peech also came on board as an investor in the company. Hampton retired at the end of 1882 and the company subsequently changed its name to Steel, Peech and Tozer^[5] - a name that would become a giant in steel making.

The steel making plant was upgraded throughout the 1880s with the addition four open hearth furnaces, creating what was known as the Rotherham Melting Shop.^[1] The processing plant increased with the addition of cogging mills, rail mills and specialist plant for the manufacture of steel springs and railway axles.^[6] The furnaces were replaced with larger furnaces from 1906.^[1]

World War I and the construction of Templeborough Melting Shop

In 1914, following the outbreak of the First World War many iron and steel companies began producing casings and steel for munitions. In this case the work was added to the normal production, which included many component orders for the military.

The Ickles site was proving too small to handle the production, and with steel in such demand, the company extended their works towards the Sheffield boundary, to occupy a site between the main Sheffield to Rotherham road and the Great Central Railway line. The new Melting Shop and Rolling Mills were built over the site of the old Roman fort at Templeborough. The Templeborough Melting Shop, when opened, was the largest melting shop of its type in Europe and contained 14 open hearth furnaces where steel scrap was melted down.

Merger into United Steel Companies

Following the end of hostilities in 1918, Steel, Peech and Tozer joined with Samuel Fox and Company of Stocksbridge and the Appleby-Frodingham Steel Company of Scunthorpe to form United Steel Companies.

World War II

During World War II, again, many iron and steel works produced munitions for the war effort, not only munitions but sections for the construction of Bailey bridges, an important assistance to the Allied troops in Italy and following the D-Day landings. Because of its size and known war effort involvement the Templeborough was a prime target for the Luftwaffe.

Project SPEAR

By the 1950s Templeborough's open hearth furnaces were in need of replacement and the United Steel Companies set about the task of updating its melting facilities. Plans were announced in July 1959 under the name “Project SPEAR” (Steel Peech Electric Arc Reorganisation), which would replace the 14 open hearth furnaces at Templeborough (and 7 in the neighbouring Rotherham works) with 6 modern electric arc furnaces.^[8] Construction began in December 1960, with the first furnace commissioned on 13 September 1962. All of the furnaces were commissioned on schedule, with last completed on 1 February 1965.^[9] In 1969, the shop produced a record 1.4 million tonnes of steel that year.^[10] When completed Templeborough Melting Shop became the world's largest electric arc steel making plant with a capability of producing 1.8 million tons per year.

Brinsworth Hot Strip Mill

At the end of the Second World War there was an increase in demand for steel products such as sheet, plate and strip due to improved living standards. As products became relatively cheap the demand grew for such items as refrigerators, canned foods and cars. SPT had a Strip Mill, which could satisfy some of this demand. It had been producing strip to a maximum width of 230 mm since 1921, however the limitation in the maximum width and site restrictions prevented extension, enlargement or modernisation of the plant. A new mill was required which would cater for the increased demand, and to this end market research was carried out to determine the size and potential of the market.

When the technical and commercial research was concluded, it was decided to build a continuous Hot Strip Mill rolling mild, carbon and special steels up to 457 mm. This new mill filled the gap between the narrow and wide strip mills operating at that time. So in July 1955 it was announced that Brinsworth Hot Strip Mill would be built on Sheffield Road opposite Templeborough Melting Shop at a cost of £3.6 m. In less than two years it was built and the first slabs rolled on 10 June 1957, quite an achievement. Full capacity was expected to be 8000 tonnes per week and in 1956 there were new orders for two to three years. These orders were mainly for the motorcar, bicycle, tube and stamping industries and nearly all of them for the home market.

When building a new plant such as Brinsworth it was necessary to ensure that there would be a good supply of raw material. The ingots produced were rolled to blooms and then slabs in the Templeborough Cogging Mill. The slabs were then delivered to Brinsworth by train on one of the six rail tracks laid. The majority of these tracks have been lifted although there is still evidence on the plant of the old railway system.

Outputs steadily increased and a second shift was added by the middle of December 1957. By September 1959, 143,258 tonnes of coils had been produced. Soon records were set and in 1973 the Hot Mill achieved its highest throughput of 425,000 tonnes in one year. This reflected the boom in industry in the early 1970s. During this period other records were set. Tommy Walker produced 1,099 tonnes on a shift on 25 January 1974, which also gave a daily record of 2,815 tonnes produced. November 1972 saw the highest production for one week at 11,486 tonnes.